Ventilation Grilles – Removable
Detailed description: Two separate parts — frame and door. Obstruction-free opening with 100% access to the clear opening. Insect mesh can be fitted on request. Installed with polyurethane sealant.
Ventilation Grilles – Fixed (Non-opening)
Detailed description: Static, non-removable grille that allows unobstructed airflow. Built from welded and specially treated frames, powder-coated in any RAL colour. Insect mesh can be fitted on request. Installed with polyurethane sealant.
Wall – Removable (Surface Mount)
Description: Our luxury removable surface-mount aluminium access panel is built from welded and specially treated frames, powder-coated in any RAL colour. Two-part design: visible frame and door. Obstruction-free opening with 100% access to the clear opening. The door infill is your design choice: printed glass, glass in a RAL colour, porcelain tile up to 20 mm thick, wood and more. Installed with polyurethane sealant.
Ceiling – Fixed (Surface Mount)
Description: Our luxury surface-mount aluminium access panel is non-removable — built from welded and specially treated frames, powder-coated in any RAL colour. It consists of a visible outer frame fixed onto a finished substrate with polyurethane sealant.
Wall – Fixed (Surface Mount)
Description: Our luxury surface-mount aluminium access panel is non-removable — built from welded and specially treated frames, powder-coated in any RAL colour. It consists of a visible outer frame fixed onto a finished substrate. Opens left, right or forward. The door infill is your design choice: printed glass, glass in a RAL colour, porcelain tile up to 20 mm thick, wood and more. Installed with polyurethane sealant.
Model T – Removable
Opening method: Universal wall model. Description: Built from a solid aluminium profile with high door load capacity. Easy to install in concrete, brick, AAC (Ytong), 12.5/25 mm GKBI drywall and other substrates.
Model T – Fixed
Opening method: Universal model for both wall and ceiling. Description: Built from a solid aluminium profile with high door load capacity. Easy to install in concrete, brick, AAC (Ytong), 12.5/25 mm GKBI drywall and other substrates.
Ceiling – Removable (Concealed Mount)
Description: On this model nothing is visible except the joint. Two-part design — frame and door — with push-to-open operation. Our patented BB-hinge ceiling access panels guarantee safe operation. Concealed mount, available with 12.5 mm or 25 mm GKBI gypsum board thickness.
Wall – Removable (Concealed Mount)
Opening method: Two separate parts — frame and door. Obstruction-free opening with 100% access to the clear opening. Compatible infills: porcelain tile, marble, wood, skim coat, paint or plaster covering the entire door behind the aluminium reveal. Description: Two-part design — frame and door — with push-to-open operation. The wall access panel can be finished with porcelain tile, skim coat, paint or plaster, fully covering the door behind the aluminium reveal. Only a 1.5 mm or 2 mm joint remains visible. Allows obstruction-free door opening. Concealed mount, available with 12.5 mm or 25 mm gypsum board thickness. The push-to-open buttons must always be located on the upper horizontal side. Suitable for both dry and wet rooms. A safety chain can be added to prevent accidental dropping and damage to people or property, and a gasket can be fitted to seal against moisture and odours coming from the riser.
Ceiling – Fixed (Concealed Mount)
Description: Built from an aluminium profile for GKBI drywall 12.5 mm or 25 mm, concealed mount. Consists of two parts — outer frame and door. The hinged access panel is not designed to be removed. No safety chain is required because the hinge axles prevent the door from falling out. Push-to-open mechanism. After finishing, only a 1.5 mm or 2 mm reveal remains visible.